| Type: | Roll Crusher |
|---|---|
| Motor Type: | AC Motor |
| Motor Power: | 1.5-3kw |
| Application: | Mine |
| Outlet Size: | 0.1-4mm |
| Inlet Size: | 13mm |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Main features:suitable for crushing hard or brittle materials;sealing design,no dust pollution,easy to clean,environmentally friendly requirements;only placed at ground level,without a fixed infrastructure can work normally
Lab double roller crusher/Lab double teeth roll crusher is applicable to medium and fine crushed materials for the purposes of laboratory and production and primarily provided as environmental protection equipment for coal,electric power, mine, geology, chemical, metallurgy,building material
and other industries.
Features
1. Suitable to crushing high hardness or brittleness of materials;
2. Continuous finish the crushing and shrinking, to avoid error by manual operation;
3. After the material shrinking, the sample with representative;
4. Sealed design, without dust pollution, easy to clean, environmental compliance;
5. Just placed on level ground, working without fixed base.
Working Principle
The machine consists of by body, rollers and other components. The spindle drive by V-belt from motor,
the roller operate according been turned trajectory, crushing the materials in crushing chamber. The
machine is equipped with adjustment screw in front and rear. The crusher left size with shield to ensure
safety, the machine with groove and bearing, the bearing can readily inject oil. Front mounted with hand
wheel,sprockets and chain, and rear equipped with springs to easy adjustment, generally please don't
adjust it. In order to avoid failure and safe use the equipment, please attention the parallel when adjusting.
| Model | Capacity (Kg/h) |
Inlet size (mm) |
Input size(mm) | Output size(mm) | Rotating speed (r/min) |
Power (kw) |
Weight(kg) | Dimensions (cm) |
| LZPC200/75 | ≤300 | 200/75 | 13 | 0.1-4 | 450 | 1.5 | 166 | 60/46/48 |
| LZPC200/125 | ≤450 | 200/125 | 13 | 0.1-4 | 400 | 3 | 180 | 78/66/57 |
| LZPC200/150 | ≤600 | 200/150 | 13 | 0.1-4 | 360 | 3 | 196 | 112/58/81 |
| LZPC250/400 | ≤1500 | 250/400 | 32 | 0.1-8 | 320 | 11 | 1200 | 133/146/82 |
1.Q:What Information needed to get accurate quotation and proposal?
A:1). What type is the mining? Is it rock stone? or it is sand?
2). If rock stone, what is the general particle size(mm) of the raw ore?
3). What is the handling capacity (tons per hour) you need?
4) .What is the elements of the raw ore? How much percent % of each minerals?
2.Q:Can we send the mineral samples to you to run the ore-dressing experiment test?
A:Yes, we can run the ore-dressing experiment for our customers. After the test, we will give you the reasonable flowchart, suitable solution and equipment selection. etc. based on the test results.
3.Q:What about warranty of the equipment? Any spare parts supplied?
A:The warranty period of OASIS equipment is 12 months. And of course we will supply the spare parts to you for life-long time at lowest cost.
4.Q: The reason you choose OASIS?
A:1). Professional manufacturer of supplying mining equipment, Ore beneficiation equipment and mining dryers.?
2). Experienced and professional R&D team and manufacturing team.
3). Professional sales team consisted of dedicated, dynamic and innovative staff with international version.
4). Professional logistics service ensuring safety and timely delivery of products all over the world.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}