Equipment introduction: the laboratory disc crusher is mainly used to facilitate enterprises or scientific research institutions to carry out experimental extraction of minerals before mining, and has determined the value of minerals and mining work. Disc crusher is mainly composed of body, base, main shaft, moving grinding plate, fixed grinding plate, end cover, upper cover and hopper. The machine body is installed on the base; Its transmission part is composed of main shaft, bearing, dynamic grinding plate and belt pulley; The working chamber is composed of an end cover, an adjusting shaft, a fixed grinding plate, a movable grinding plate and a feeding port. When the disc crusher works, the motor transmits the power to the transmission part through the triangle belt, so that the moving grinding plate and the fixed grinding plate move relatively, so as to crush the incoming materials. The material is crushed in the working room. The material enters the hopper from the feeding port above the end cover and enters the middle of the two grinding plates through the feeding port. The sample is crushed due to extrusion and grinding. The crushed sample flows out from the gap between the two grinding plates and falls into the hopper below.
Application fields:
metallurgy, geology, mining, building materials, chemical industry laboratory or laboratory, and University experience research experiment and other places.
Equipment advantages: the laboratory disc crusher has good sealing performance, convenient cleaning, large hardness, small volume, light weight, small pollution, and easy and fast use.
working principle:
The machine is mainly composed of body, base, main shaft, moving grinding plate, fixed grinding plate, end cover, upper cover and hopper. Through the triangle belt, the power is transmitted to the belt pulley to drive the spindle to rotate, so that the dynamic grinding plate is fixed, and the grinding plate moves relatively, so that the sample is crushed. The discharge granularity can be controlled by adjusting the clearance of grinding plate through the size handwheel and spindle.
The machine body is installed on the base, and its transmission part is composed of transmission shaft, bearing, dynamic grinding plate, belt pulley, working chamber end cover, adjusting shaft, fixed grinding plate, hand wheel and feeding port.
The material is crushed in the working room. The material is added from the feeding port above the end cover and enters into the middle of the two grinding plates. Due to the extrusion effect, the crushed sample flows out from the gap between the two grinding plates and falls into the hopper below.
The grinding plate is made of water toughened strong white iron, which has good wear resistance.
The principle of the adjusting mechanism is to rotate the hand wheel to make the adjusting shaft move forward or backward, so as to adjust the gap between the two grinding plates and adjust the particle size of materials.
| Model |
Capacity(Kg/h) |
Disk dia(mm) |
Feed size(mm) |
Output size(mm) |
Rotating speed(r/min) |
Power(kw) |
Weight(kg) |
| LZPF 175 |
10-30 |
175 |
4 |
0.18-0.074 |
980 |
1.1 |
100 |
| LZPF 200 |
15-40 |
200 |
6 |
0.18-0.074 |
950 |
1.5 |
150 |
| LZPF 250 |
25-50 |
250 |
8 |
0.18-0.074 |
800 |
2.2 |
170 |
| LZPF300 |
40-80 |
300 |
10 |
0.18-0.074 |
800 |
4 |
195 |
Our Services
(1) Select equipment model;
(2) Design and manufacture products according to clients' special requirement;
(3) Train technical personnel for clients.
2. Serivces during the sale:
(1) Pre-check and accept products ahead of delivery;
(2) Help clients to draft solving plans;
(3) Guide clients how to install equipment successfully without problem.
3. After-sale services:
(1) Assist clients to prepare for the first construction scheme;
(2) Install and debug the equipment;
(3) Train the first-line operators on site.
Profile
Shicheng Oasis Mineral Equipment Manufacturing Co., Ltd. is an import-export trade enterprise engaged in the production, sale and installation of mineral equipment, environmental protection equipment, hardware and machinery. Our company has been approved for registration by relevant departments, and can provide users with project design, process design and uniform and non-uniform design services.
We manufacture crushers, sand makers, mine selection equipment and gold washing machine and sand washing machine and laboratory equipment. Our main series include shaking tables, jiggers, spiral chutes, flotation machines, spiral classifiers, ball mills, mixing tanks, feeding machines, vibrating screens, crushers, sand pumps, magnetic separators, hydraulic graders, hydraulic cyclones, sand machines, laboratory sand pumps, laboratory shakers, laboratory spiral chutes, laboratory flotation machines, laboratory ball mills, laboratory crushers, laboratory magnetic separators, laboratory mixing barrels, grinding machines and vacuum filters.
We are able to make products according to customers' requirements. Our machines are widely used to separate iron, copper, gold, silver, lead, molybdenum, tungsten, manganese and other rare and precious metals. Our products are now widely used in metallurgical, mining, chemical, construction, coal processing, refractory and research fields.
1.Q:What Information needed to get accurate quotation and proposal?
A:1). What type is the mining? Is it rock stone? or it is sand?
2). If rock stone, what is the general particle size(mm) of the raw ore?
3). What is the handling capacity (tons per hour) you need?
4) .What is the elements of the raw ore? How much percent % of each minerals?
2.Q:Can we send the mineral samples to you to run the ore-dressing experiment test?
A:?Yes, we can run the ore-dressing experiment for our customers. After the test, we will give you the reasonable flowchart, suitable solution and equipment selection. etc. based on the test results.
3.Q:What about warranty of the equipment? Any spare parts supplied?
A:The warranty period of?OASIS?equipment is 12 months. And of course we will supply the spare parts to you for life-long time at lowest cost.
4.Q: The reason you choose OASIS?
A:1). Professional manufacturer of supplying mining equipment, Ore beneficiation equipment and mining dryers.?
2). Experienced and professional R&D team and manufacturing team.
3). Professional sales team consisted of dedicated, dynamic and innovative staff with international version.
4). Professional logistics service ensuring safety and timely delivery of products all over the world.
Audited Supplier 
){kind=link}
){kind=link}