| Type: | Gravity Separator |
|---|---|
| Weight: | <1T |
| Material: | Plastic |
| Certification: | ISO9001:2008 |
| Energy Saving: | Energy Saving |
| Color: | Green |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Operation: In order to operate the Le Trap sluice in a stream, you will want fairly fast water. The closed end of the Bank Robber Sluice can be cut out, creating the River Robber Sluice.
The flared riffle design causes the water flow to slow as it passes through the sluice, resulting in optimum gold recovery. In working this box, water should run through very rapidly, about 2" deep, which keeps the riffles clean and will leave the gold and very little concentrates behind.
An ideal sluice for times when weight must be kept to a minimum. The sluice is made of high impact ABS plastic and will take a lot of abuse, but should you ever get a crack or chip in it, it can be welded with ABS glue, available at most hardware stores. Please note that these sluice come with the only the discharge end open.
Remember, it ships with the upper end squared off so the unit can be turned into a highbanker if you wish. If you just want to use it in a creek with water flowing through it, simply cut or saw the input end off to let the water into the sluice. Simple! Have fun and tons of gold to you!
Use it as regular stream sluice or make your own power sluice by adding inexpensive piping and a small pump.
Instructions
Step 1 - Setting up the Sluice
Locate a place in the stream with fast water and a gradual drop. Water should run fast enough to move a 1" to 2" rock through the sluice about as fast as you can walk through with your fingers. You may have to remove or rearrange rocks to provide a space for the sluice to set so as to provide approximately 1 ½" to 2" of water uniformly at the proper speed. Rocks upstream may have to be arranged to divert water either in or out of the sluice.
Step 2 - Holding the sluice in place.
To hold the sluice in the river, it is suggested to put a 1 x 4 x 15" board or aluminum angle across the sluice at the narrow section. This board will allow you to place a rock approximately 5 to 10 pounds on the board to hold the sluice in place. Use just enough weight to hold the sluice in the stream. There are many other ways of making a rock holder for your sluice box.
Step 3 - Processing the material.
Deposit the Gold bearing material in the flat portion of the sluice and allow the water to wash it through the sluice. Feed the material into the sluice at the rate that will allow at least one ridge to be seen all the way across the sluice. NOTE: Sluice operation will run more smoothly if the bank material is first run through a JOBE ½" classifier, thus eliminating the larger rocks from blocking the riffles and slowing down the processing of your material. Continue to feed the material until the bottoms of the riffles become plugged with heavy black sands which will prevent the Gold from settling to the bottom. The amount of material that can be run will vary from one location to another, depending on the types of deposits in the area.
Step 4 - Clean out.
When you have processed the bank material, allow clear water to flow through to wash out any excess lighter material. When the sluice is ready for clean out, lift the intake end out of the water first. This stops the water flowing through the sluice and drains the excess water out. Pick up the sluice and place the lower left corner into a bucket or Gold pan. Keep the sluice tilted to the left side, splash or pour water, washing the concentrates into the container. At this time you can see the Gold laying in the riffles. If there is Gold in the lower end of the sluice, the angle or the water flow can be changed to correct this.
Shicheng Oasis Mineral Equipment Manufacturing Co.,Ltd is an import-export trade enterprise specializing in the production, sale and installation of mineral equipment, environmental protection equipment, hardware and machinery. We awarded CE and ISO9001:2008 international quality management system certification.
Company mainly produces laboratory and production crushers, conveyors, feeders, vibrating screens, ball mill, washing machine, mixing tank, magnetic separator, shaking table, jigging machine, spiral chute, flotation machine, melting furnace, sand washing machine and etc.
1.Q:What Information needed to get accurate quotation and proposal?
A:1). What type is the mining? Is it rock stone? or it is sand?
2). If rock stone, what is the general particle size(mm) of the raw ore?
3). What is the handling capacity (tons per hour) you need?
4) .What is the elements of the raw ore? How much percent % of each minerals?
2.Q:Can we send the mineral samples to you to run the ore-dressing experiment test?
A:?Yes, we can run the ore-dressing experiment for our customers. After the test, we will give you the reasonable flowchart, suitable solution and equipment selection. etc. based on the test results.
3.Q:What about warranty of the equipment? Any spare parts supplied?
A:The warranty period of?OASIS?equipment is 12 months. And of course we will supply the spare parts to you for life-long time at lowest cost.
4.Q: The reason you choose OASIS?
A:1). Professional manufacturer of supplying mining equipment, Ore beneficiation equipment and mining dryers.?
2). Experienced and professional R&D team and manufacturing team.
3). Professional sales team consisted of dedicated, dynamic and innovative staff with international version.
4). Professional logistics service ensuring safety and timely delivery of products all over the world.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}