planetary ball mill
Equipment introduction: planetary ball mill is a powerful, fast and efficient equipment for laboratory sample preparation, which can meet the requirements of high-precision sample grinding. The friction and impact energy produced by the centrifugal force of the equipment can form a significant crushing effect on the material. It has the characteristics of short grinding time, high grinding precision, strong controllability and safe use.
The planetary ball mill of our company has the advantages of small volume, full function, high efficiency, low noise and no pollution. It is an ideal equipment for scientific research institutions, colleges and universities, and enterprise laboratories to obtain research samples (2-4 samples can be obtained at the same time in each experiment). Equipped with vacuum ball mill, it can grind samples in vacuum state. The machine can be used for dry and wet grinding. It can set the grinding time by itself, and can adjust the speed by frequency conversion, The speed accuracy is 0.2 rpm, the feed particle size is less than or equal to 10 mm for soil material, less than or equal to 3 mm for other materials, and the minimum discharge particle size is 0.1 μ M micron (or even nanometer) ball mill can be made of agate, alumina, corundum ceramics, zirconia ceramics, silicon nitride ceramics, silicon carbide ceramics, stainless steel, high wear resistant steel, manganese steel, nylon, polytetrafluoroethylene, polyurethane, cemented carbide, crystal glass, etc. ball can be made of agate, alumina, zirconia, silicon nitride, silicon carbide, stainless steel, high wear resistant steel, manganese steel, nylon, polyurethane, cemented carbide, etc, The general treatment capacity is 30% of the volume per time.
Application: planetary ball mill is widely used in geology, metallurgy, soil, building materials, chemical industry, light industry, medicine, electronics, ceramics, batteries, environmental protection and other fields of experimental screening work.
Equipment advantages:
1. Using gear transmission, gear transmission will not slip, to ensure that the speed of four cans is consistent! In the case of ball milling the same material, it can ensure the consistency of the material in the four pots after ball milling is very good! And can ensure the same material, in the same process, the effect of each ball milling is consistent! That is, it has good repeatability and consistency!
2. Fast rotation, high energy, high efficiency and fine particle size
3. Four samples of different sizes and materials can be ground simultaneously in one experiment.
4. The ball mill has the functions of frequency conversion, program-controlled stepless speed regulation and so on.
5. Equipped with timing shutdown, automatic timing forward and reverse device, according to the needs of free choice, practical and convenient.
6. This machine has the advantages of low center of gravity, good rigidity, compact structure, convenient operation, safety and reliability, low noise, no pollution, small loss and so on.
| Model |
Volume(L) |
Qty(pcs) |
Revolution(rpm) |
Rotation(rpm) |
Motor |
Voltage |
Dimension size(cm) |
Weight |
| LZQM0.4L |
0.05-0.1 |
4 pcs |
40-450 |
60-900 |
0.55kw |
220V |
53/30/35 |
45kg |
| LZQM1L |
0.05-0.25 |
4 pcs |
40-450 |
60-900 |
0.55kw |
220V |
53/30/35 |
55kg |
| LZQM2L |
0.05-0.5 |
4 pcs |
35-335 |
70-670 |
0.75kw |
220V |
75/45/55 |
83kg |
| LZQM4L |
0.25-1 |
4 pcs |
35-335 |
70-670 |
0.75kw |
220V |
75/47/57 |
90kg |
| LZQM6L |
1-1.5 |
4 pcs |
35-335 |
70-670 |
0.75kw |
220V |
77/47/57 |
95kg |
| LZQM8L |
1-2 |
4 pcs |
35-290 |
70-580 |
1.5kw |
220V |
90/60/64 |
136kg |
| LZQM10L |
1-2.5 |
4 pcs |
35-290 |
70-580 |
1.5kw |
220V |
90/60/46 |
145kg |
| LZQM12L |
1-3 |
4 pcs |
35-290 |
70-580 |
1.5kw |
220V |
90/60/46 |
150kg |
| LZQM20L |
2-5 |
4 pcs |
25-215 |
50-430 |
4kw |
380V |
120/76/64 |
430kg |
| LZQM40L |
5-10 |
4 pcs |
20-195 |
40-390 |
5.5kw |
380V |
140/85/103 |
665kg |
| LZQM60L |
10-15 |
4 pcs |
27-174 |
40-260 |
7.5kw |
380V |
160/950/112 |
865kg |
| LZQM100L |
20-25 |
4 pcs |
27-160 |
40-240 |
11kw |
380V |
175/114/133 |
1210kg |
Our Services
(1) Select equipment model;
(2) Design and manufacture products according to clients' special requirement;
(3) Train technical personnel for clients.
2. Serivces during the sale:
(1) Pre-check and accept products ahead of delivery;
(2) Help clients to draft solving plans;
(3) Guide clients how to install equipment successfully without problem.
3. After-sale services:
(1) Assist clients to prepare for the first construction scheme;
(2) Install and debug the equipment;
(3) Train the first-line operators on site.
Profile
Shicheng Oasis Mineral Equipment Manufacturing Co., Ltd. is an import-export trade enterprise engaged in the production, sale and installation of mineral equipment, environmental protection equipment, hardware and machinery. Our company has been approved for registration by relevant departments, and can provide users with project design, process design and uniform and non-uniform design services.
We manufacture crushers, sand makers, mine selection equipment and gold washing machine and sand washing machine and laboratory equipment. Our main series include shaking tables, jiggers, spiral chutes, flotation machines, spiral classifiers, ball mills, mixing tanks, feeding machines, vibrating screens, crushers, sand pumps, magnetic separators, hydraulic graders, hydraulic cyclones, sand machines, laboratory sand pumps, laboratory shakers, laboratory spiral chutes, laboratory flotation machines, laboratory ball mills, laboratory crushers, laboratory magnetic separators, laboratory mixing barrels, grinding machines and vacuum filters.
We are able to make products according to customers' requirements. Our machines are widely used to separate iron, copper, gold, silver, lead, molybdenum, tungsten, manganese and other rare and precious metals. Our products are now widely used in metallurgical, mining, chemical, construction, coal processing, refractory and research fields.
1.Q:What Information needed to get accurate quotation and proposal?
A:1). What type is the mining? Is it rock stone? or it is sand?
2). If rock stone, what is the general particle size(mm) of the raw ore?
3). What is the handling capacity (tons per hour) you need?
4) .What is the elements of the raw ore? How much percent % of each minerals?
2.Q:Can we send the mineral samples to you to run the ore-dressing experiment test?
A:?Yes, we can run the ore-dressing experiment for our customers. After the test, we will give you the reasonable flowchart, suitable solution and equipment selection. etc. based on the test results.
3.Q:What about warranty of the equipment? Any spare parts supplied?
A:The warranty period of?OASIS?equipment is 12 months. And of course we will supply the spare parts to you for life-long time at lowest cost.
4.Q: The reason you choose OASIS?
A:1). Professional manufacturer of supplying mining equipment, Ore beneficiation equipment and mining dryers.?
2). Experienced and professional R&D team and manufacturing team.
3). Professional sales team consisted of dedicated, dynamic and innovative staff with international version.
4). Professional logistics service ensuring safety and timely delivery of products all over the world.
Audited Supplier 
){kind=link}
){kind=link}