Diesel Engine Hammer Crusher Parts Portable Mobile Diesel Hammer Crusher With Feeder Stone Crusher Hammer Mill Machine
Equipment introduction:
Oasis diesel engine hammer crusher (sand machine) is less investment and quick effect of breaking (powder) ore crushing equipment.It has the characteristics of easy installation,easy operation,large amount of ore processing, etc.,suitable for breaking (powder)smaller than 50 mm vein ore,placer ore,tailing small concentrator.
Application: Widely used in sand making and mineral crushing site.
Equipment advantages:
1.The sand machine has simple and reasonable structure and low operation cost;
2.high crushing efficiency, energy saving and environmental protection;
3.with fine grinding, coarse grinding function;
4.The sand machine is little affected by the moisture content of the material,and the water content can reach about 8%;
5.more suitable for crushing hard,especially hard materials;
6.the impeller self-lining wear is small, easy maintenance;
Work debugging: the sand-punching machine is fixed on the channel steel frame,and three boxes of electricity are connected to the motor.The belt is placed on the belt wheel of the sand-punching machine and the small belt wheel of the motor,and the six internal sand hammers of the sand-punching machine are installed on the steel pipe of the disk in order.
Channel steel frame fixed on firmer ground,foot screws in the land or the following part of the channel steel frame with cement(60 mm),play sand machine on both sides of the bearing on often should add lubricating oil (butter) debugging, take on part of the play sand machine,and then bring out the inside of the sand hammer and spindle are,under the sieve plate can be adjusted upwards or downwards,The sieve plate can also be replaced.
Maintenance of machine:
Machine maintenance is an extremely important regular work, it should be closely coordinated with the operation and maintenance of the machine, there should be full-time personnel on duty inspection.
1.All the load bearing for machine, so good lubrication for the bearing life has a lot to do, it directly affects the service life of machine and availability, and requirements into lubricating oil must be clean and seal must be good, the machine's main oil:(1) the rotation bearing (2) roll bearing bearing, sliding plane (3) all the gear (4) activities.
2.A newly installed tyre tyre is prone to loosening and must be inspected frequently.
3.Pay attention to the proper working of all parts of the machine.
4.It is important to check the wear degree of easy to wear parts, and pay attention to replacing worn parts at any time.
5.When the base plane of the insensitive device is put, dust and other objects should be removed so that the machine can not be broken when the movable bearing can not move on the base, resulting in a serious accident.
6.The temperature of the bearing oil rose high, it should be stopped immediately to check the reason to remove.
7.If the turning gear has an impact sound while running, it should stop immediately, check it, and eliminate it
Installation commissioning:
1.The equipment should be installed on a horizontal concrete foundation and fixed with anchor bolts.
2.Should pay attention to the vertical of the main body and the level.
3.Check whether bolts are loose and host door is fastened after installation. If so, tighten.
4.Power lines and control switches are configured according to the power of the equipment.
5.Check has been completed, then do the empty load testing, after testting can be normal production.
|
Model
|
Capacity
|
Input size
|
Output size
|
Hammer of piece
|
Motor
|
Diesel
|
|
LZPC240/500
|
1-2 t/h
|
≤50 mm
|
0.1-12 mm
|
6 pcs
|
7.5-15 kw
|
11-21 Horse
|
|
LZPC300/500
|
1.5-3 t/h
|
≤50 mm
|
0.1-12 mm
|
8 pcs
|
11-18.5 kw
|
15-16 Horse
|
|
LZPC400/500
|
3-6 t/h
|
≤100 mm
|
0.1-12 mm
|
10 pcs
|
15-28 kw
|
21-30 Horse
|
|
LZPC400/600
|
4-8 t/h
|
≤100 mm
|
0.1-12 mm
|
10 pcs
|
18.5-30 kw
|
26-41 Horse
|
|
LZPC500/600
|
5-12 t/h
|
≤150 mm
|
0.1-12 mm
|
12 pcs
|
22-30 kw
|
30-41 Horse
|
|
LZPC600/800
|
15-50 t/h
|
≤180 mm
|
0.1-15 mm
|
32 pcs
|
30-55 kw
|
41-75 Horse
|
|
LZPC800/1000
|
20-60 t/h
|
≤300 mm
|
0.1-15 mm
|
32 pcs
|
75-90 kw
|
103-123 Horse
|
Oasis Industrial Equipment Technology Com. Ltd.,is an import-export trade enterprise enterprise engaged in the production,sale and installation of mineral equipment,environmental protection equipment,hardware and machinery.
Our company has been approved for registration by relevant departments,and can provide users with project design,process design and uniform and non-uniform design services.
Part of the company products to obtain a patent tor invention,the company awarded the CE & ISO9001:2008 international quality management system certification.
Oasis Company mainly produce laboratory crusher,conveyor,feeder,vibrating screen,ball mill,washing machine,mixing tank,magnetic separator,shaking table,jig,spiral the other can be customized according to customers' requirements of various types of mineral processing machinery and equipment,such as complete set of processing equipment,applicable to iron, cooper, gold,silver, lead,tin,tantalum,niobium,monazite, rutile, tungsten,zinc,molybdenum,manganese and other non-ferrous metal and fluorite,quartz and other non-metallic mineral,widely used in metallurgy,mining,chemical industry,building materials,coal,refractory, materials,schools and other industries.
Company's products have been sold to :Australian, Germany, Canada, Mexico, Fiji, Belgium, Russia,South Africa,Nigeria,Uruguay, Congo(cloth),India, Indonesia, Malaysia,the Philippines, Korea,Mongolia,Vietnam,Chile,Mali,Finland,Kenya ,Laos,Japan,USA, Tanzania, Ethiopia,Sudan and other countries,our engineer went to some county before.
1.Q: What Information needed to get accurate quotation and proposal?
A:1).What type is the mining? Is it rock stone? or it is sand?
2).It is rock stone, so what is the general particle size(mm) of the raw ore?
3).What is the handling capacity (tons per hour) you need?
4).What is the elements of the raw ore? How much percent of each minerals?
2. Q: Can we send the mineral samples to you to run the ore-dressing experiments test?
A: Yes, we can run the ore-dressing experiments for our customers. After the test, we will give you the reasonable flowchart, suitable solution and equipments selection. etc. based on the test results.
3.Q: What about warranty of the equipments? Any spare parts supplied?
A: The warranty period of OASIS equipments is 24 months. And of course we will supply the spare parts to you for life-long time at lowest cost.
4.Q: Why choose OASIS?
A:1). Professional manufacturer of supplying mining equipment, Ore beneficiation equipment and mining dryers.
2). Experienced and professional R&D team and manufacturing team.
3). Professional sales team consisted of dedicated, dynamic and innovative staff with international version.
4). Professional logistics service ensuring safety and timely delivery of products all over the world.
Audited Supplier 
){kind=link}
){kind=link}